Thermostatic Valve Cut-out
|
Valve Access Height
Enter the measurement from the floor to the center of the Thermostatic valve.
We will cut a access hole 150mm high x 90mm wide and supply a cover flap for the hole.
The side for the cut-out is taken as viewed standing in front of the radiator facing it.
The minimum depth measurement entered for a radiator cover must be 100mm. If you order a cover with a depth of less than 100mm we will increase the depth to 100mm.
|
|
Valve Access Depth
Enter the measurement from the wall to the center of the Thermostatic valve.
We will cut a 150mm high x 90mm wide access hole and supply a cover flap for the hole.
The side for the cut-out is taken as viewed standing in front of the radiator facing it.
The minimum depth measurement entered of the radiator for this service is 100mm, if you enter a depth of less than 100mm, we wil increase the depth to 100mm.
We will use the measurements you provide as a guide to position the cut out, however due to the cabinet construction we may need to adjust the cut out location at the time of manufacture. We will keep as close a possible to the measurements you provide.
The cover flap may need trimming around the skirting cut outif the valve access cut out is positioned in close proximity to it. |
|
|
 |